🚚 Free Worldwide Shipping on All Orders!Shop Now
Floor-Stand Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 60"Wx 24"Dx 48"H, FH-60
HomeStore

Floor-Stand Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 60"Wx 24"Dx 48"H, FH-60

Floor-Stand Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 60"Wx 24"Dx 48"H, FH-60

The floor-stand EQ-FH-60 fume hood provides a working space that minimizes the chance of damages from a hazardous situation. The fume hood is equipped with tempered glass with an anti-shattering film, centrifugal fan, and vapor-proof low-voltage LED light.  It is an ideal fume-hood for the material research lab to handle flammable or corrosive gasses. It is a 68-inch wide platform that can accommodate large three-zone tubing furnaces.

SPECIFICATIONS

Fume Hood Features & Dimensions
  • Ducted type fume hood
  • Steel frame with tempered glass front panel
  • Anti-shattering film on front glass panel: the film holds shattered glass in place to minimize damage from broken glass.
  • The round side door on each side for easy access to the flange on the furnace.
  • Chemical-resistant laminate platform
  • Fire retardant Compact Grade Laminate plates (Rear & side)
  • Blow Rate:  1995 M³/ hour = 33 M³/minute = 1165 CF/minute
Power Requirement
    • 110V 60Hz
    • 220V +/-10% Single Phase configuration is available at extra cost (>300W transformer is needed)
    Blower
    • Inline Centrifugal blower (ETL Listed)
    • Flow Rate:           CFM: 780
    • Speed:                 RPM: 2480
    • Power:                 110V, 2.1Amps
    • Fan Diameter:      10 inch
    Option function of Blower
    • Speed Control for the blower is available at extra cost
    Accessories
    • Two Power Plugs are installed inside the hood
    • Low-voltage, spark-free LED vapor-proof light
    • 10" hose port   ( hose pipe is not included )
    Option Accessories
    • Please contact us to order option Inline carbon filter to maintain a safe laboratory environment.
    • Compact design carbon filter, leave enough room to operate inside the fume hood. (30 inches height remain to operate from the bottom of the fume hood )
    •         
    Dimensions
    • Overall dimension: 68"W x 32"D x 57"H
    • Shipping weight 555 lbs with dimensions of 75"x45"x85"
    Compliance
    • MET Certification is available upon request at extra cost, please contact our sales representitives for a price quote. Certify standards include: 1) Induction heater: UL61010-1 & UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 & UL1995  
    Warranty
    Two years limited with lifetime support.
    Operation Instructions
    Application Note
    • If your lab required to reduce the airflow needed, you may need to limit the door height (sash height for example 18") during operation. Please email us before ordering, we could add a height limit for the fume hood. Work at proper Window Sash Height. The full personal protection provided at this opening blower cuts out with a lowered window.
    • We suggest accommodating CVD or hydrogen furnace with a fume hood.
    • Please email us for more information of Floor Mounted Fume Hoods/Walk-In Fume Hoods.
                
    Related Product
    For a space-saving solution, please have a look at FH-36, our bench-top fume hood.
        fume hood with tube furnace 2
    $2,309.40

    Original: $7,698.00

    -70%
    Floor-Stand Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 60"Wx 24"Dx 48"H, FH-60—

    $7,698.00

    $2,309.40

    Floor-Stand Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 60"Wx 24"Dx 48"H, FH-60

    The floor-stand EQ-FH-60 fume hood provides a working space that minimizes the chance of damages from a hazardous situation. The fume hood is equipped with tempered glass with an anti-shattering film, centrifugal fan, and vapor-proof low-voltage LED light.  It is an ideal fume-hood for the material research lab to handle flammable or corrosive gasses. It is a 68-inch wide platform that can accommodate large three-zone tubing furnaces.

    SPECIFICATIONS

    Fume Hood Features & Dimensions
    • Ducted type fume hood
    • Steel frame with tempered glass front panel
    • Anti-shattering film on front glass panel: the film holds shattered glass in place to minimize damage from broken glass.
    • The round side door on each side for easy access to the flange on the furnace.
    • Chemical-resistant laminate platform
    • Fire retardant Compact Grade Laminate plates (Rear & side)
    • Blow Rate:  1995 M³/ hour = 33 M³/minute = 1165 CF/minute
    Power Requirement
      • 110V 60Hz
      • 220V +/-10% Single Phase configuration is available at extra cost (>300W transformer is needed)
      Blower
      • Inline Centrifugal blower (ETL Listed)
      • Flow Rate:           CFM: 780
      • Speed:                 RPM: 2480
      • Power:                 110V, 2.1Amps
      • Fan Diameter:      10 inch
      Option function of Blower
      • Speed Control for the blower is available at extra cost
      Accessories
      • Two Power Plugs are installed inside the hood
      • Low-voltage, spark-free LED vapor-proof light
      • 10" hose port   ( hose pipe is not included )
      Option Accessories
      • Please contact us to order option Inline carbon filter to maintain a safe laboratory environment.
      • Compact design carbon filter, leave enough room to operate inside the fume hood. (30 inches height remain to operate from the bottom of the fume hood )
      •         
      Dimensions
      • Overall dimension: 68"W x 32"D x 57"H
      • Shipping weight 555 lbs with dimensions of 75"x45"x85"
      Compliance
      • MET Certification is available upon request at extra cost, please contact our sales representitives for a price quote. Certify standards include: 1) Induction heater: UL61010-1 & UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 & UL1995  
      Warranty
      Two years limited with lifetime support.
      Operation Instructions
      Application Note
      • If your lab required to reduce the airflow needed, you may need to limit the door height (sash height for example 18") during operation. Please email us before ordering, we could add a height limit for the fume hood. Work at proper Window Sash Height. The full personal protection provided at this opening blower cuts out with a lowered window.
      • We suggest accommodating CVD or hydrogen furnace with a fume hood.
      • Please email us for more information of Floor Mounted Fume Hoods/Walk-In Fume Hoods.
                  
      Related Product
      For a space-saving solution, please have a look at FH-36, our bench-top fume hood.
          fume hood with tube furnace 2

      Product Information

      Shipping & Returns

      Description

      The floor-stand EQ-FH-60 fume hood provides a working space that minimizes the chance of damages from a hazardous situation. The fume hood is equipped with tempered glass with an anti-shattering film, centrifugal fan, and vapor-proof low-voltage LED light.  It is an ideal fume-hood for the material research lab to handle flammable or corrosive gasses. It is a 68-inch wide platform that can accommodate large three-zone tubing furnaces.

      SPECIFICATIONS

      Fume Hood Features & Dimensions
      • Ducted type fume hood
      • Steel frame with tempered glass front panel
      • Anti-shattering film on front glass panel: the film holds shattered glass in place to minimize damage from broken glass.
      • The round side door on each side for easy access to the flange on the furnace.
      • Chemical-resistant laminate platform
      • Fire retardant Compact Grade Laminate plates (Rear & side)
      • Blow Rate:  1995 M³/ hour = 33 M³/minute = 1165 CF/minute
      Power Requirement
        • 110V 60Hz
        • 220V +/-10% Single Phase configuration is available at extra cost (>300W transformer is needed)
        Blower
        • Inline Centrifugal blower (ETL Listed)
        • Flow Rate:           CFM: 780
        • Speed:                 RPM: 2480
        • Power:                 110V, 2.1Amps
        • Fan Diameter:      10 inch
        Option function of Blower
        • Speed Control for the blower is available at extra cost
        Accessories
        • Two Power Plugs are installed inside the hood
        • Low-voltage, spark-free LED vapor-proof light
        • 10" hose port   ( hose pipe is not included )
        Option Accessories
        • Please contact us to order option Inline carbon filter to maintain a safe laboratory environment.
        • Compact design carbon filter, leave enough room to operate inside the fume hood. (30 inches height remain to operate from the bottom of the fume hood )
        •         
        Dimensions
        • Overall dimension: 68"W x 32"D x 57"H
        • Shipping weight 555 lbs with dimensions of 75"x45"x85"
        Compliance
        • MET Certification is available upon request at extra cost, please contact our sales representitives for a price quote. Certify standards include: 1) Induction heater: UL61010-1 & UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 & UL1995  
        Warranty
        Two years limited with lifetime support.
        Operation Instructions
        Application Note
        • If your lab required to reduce the airflow needed, you may need to limit the door height (sash height for example 18") during operation. Please email us before ordering, we could add a height limit for the fume hood. Work at proper Window Sash Height. The full personal protection provided at this opening blower cuts out with a lowered window.
        • We suggest accommodating CVD or hydrogen furnace with a fume hood.
        • Please email us for more information of Floor Mounted Fume Hoods/Walk-In Fume Hoods.
                    
        Related Product
        For a space-saving solution, please have a look at FH-36, our bench-top fume hood.
            fume hood with tube furnace 2