🚚 Free Worldwide Shipping on All Orders!Shop Now

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300

MSK-HRP-300 (updated from MSK-H2150-RP300) is a special Roll-to-Plate hot press with a working temperature of up to 200°C. The hot roll drives a hot pate via DC motor to achieve flat pressing, which is designed for better laminating multilayer materials

SPECIFICATIONS:

Power	208-240 VAC, 50/60 Hz, single phase, 20 A 4.5 kVA
Roller Material & Size	High strength refractory steel with hardness RC > 58 Roller Size: 96 mm Dia. x 220mm W (4" D x 8"W) Suggested rolling width: 150 mm Roll line speed: 0~ 50 mm/s adjustable Max. the temperature for the roller: 200°C Driving by DC motor Ar gas glove box compatible
Roller Gap ( Thickness )	0~ 1.8 mm adjustable
Dial Gauge Accuracy (Thickness Indicating )	Dual digital micrometer heads Accuracy: +/- 0.005mm
Movable Hot Plate	The hot plate is made of High strength refractory steel with hardness RC > 58 Dimension: 200 mm W x 300 mm L The hot plate is movable by the hot roller via friction Max. working temperature: 300°C Water chiller is required but not included if the working temperature is > 100°C Max. Rolling width on the plate: 150mm
Heating Temperature	Two digital temperature controllers for control hot roller and hot plate separately 200°C suggested, and 300°C maximum Max Heating Rate: 4°C/minute Temperature Control Accuracy: +/-3°C
Motor (Ar Gas Glove Box Compatible)	High torque 24VDC motor with reducing gear (1:75) Motor power: 40W Rolling speed adjustable: 5~45 r/min
Output Thickness	Depending on the electrode's material and thickness, typically: A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm Thickness uniformity: +/- 2 microns if coating electrode thickness +/- 5 micron and each rolling increased < 10 microns
Compliance	CE Certified NRTL or CSA certification is available upon request at extra cost
Warnings	Do not touch the surface of the rolling part of the machine when the rollers are heated up or running You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy Multi-step thickness calendaring needed: While calendaring the sample sheet, make each calendaring decrement of 0.02mm compared with the sheet's original thickness

$8,999.40

Original: $29,998.00

-70%

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300—

$29,998.00

$8,999.40

More Images

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300 - Image 2

200°C Roll to Plate Hot Rolling Mill (200 mm width) - MSK-HRP-300

MSK-HRP-300 (updated from MSK-H2150-RP300) is a special Roll-to-Plate hot press with a working temperature of up to 200°C. The hot roll drives a hot pate via DC motor to achieve flat pressing, which is designed for better laminating multilayer materials

SPECIFICATIONS:

Power	208-240 VAC, 50/60 Hz, single phase, 20 A 4.5 kVA
Roller Material & Size	High strength refractory steel with hardness RC > 58 Roller Size: 96 mm Dia. x 220mm W (4" D x 8"W) Suggested rolling width: 150 mm Roll line speed: 0~ 50 mm/s adjustable Max. the temperature for the roller: 200°C Driving by DC motor Ar gas glove box compatible
Roller Gap ( Thickness )	0~ 1.8 mm adjustable
Dial Gauge Accuracy (Thickness Indicating )	Dual digital micrometer heads Accuracy: +/- 0.005mm
Movable Hot Plate	The hot plate is made of High strength refractory steel with hardness RC > 58 Dimension: 200 mm W x 300 mm L The hot plate is movable by the hot roller via friction Max. working temperature: 300°C Water chiller is required but not included if the working temperature is > 100°C Max. Rolling width on the plate: 150mm
Heating Temperature	Two digital temperature controllers for control hot roller and hot plate separately 200°C suggested, and 300°C maximum Max Heating Rate: 4°C/minute Temperature Control Accuracy: +/-3°C
Motor (Ar Gas Glove Box Compatible)	High torque 24VDC motor with reducing gear (1:75) Motor power: 40W Rolling speed adjustable: 5~45 r/min
Output Thickness	Depending on the electrode's material and thickness, typically: A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm Thickness uniformity: +/- 2 microns if coating electrode thickness +/- 5 micron and each rolling increased < 10 microns
Compliance	CE Certified NRTL or CSA certification is available upon request at extra cost
Warnings	Do not touch the surface of the rolling part of the machine when the rollers are heated up or running You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy Multi-step thickness calendaring needed: While calendaring the sample sheet, make each calendaring decrement of 0.02mm compared with the sheet's original thickness

Product Information

Shipping & Returns

Description

MSK-HRP-300 (updated from MSK-H2150-RP300) is a special Roll-to-Plate hot press with a working temperature of up to 200°C. The hot roll drives a hot pate via DC motor to achieve flat pressing, which is designed for better laminating multilayer materials

SPECIFICATIONS:

Power	208-240 VAC, 50/60 Hz, single phase, 20 A 4.5 kVA
Roller Material & Size	High strength refractory steel with hardness RC > 58 Roller Size: 96 mm Dia. x 220mm W (4" D x 8"W) Suggested rolling width: 150 mm Roll line speed: 0~ 50 mm/s adjustable Max. the temperature for the roller: 200°C Driving by DC motor Ar gas glove box compatible
Roller Gap ( Thickness )	0~ 1.8 mm adjustable
Dial Gauge Accuracy (Thickness Indicating )	Dual digital micrometer heads Accuracy: +/- 0.005mm
Movable Hot Plate	The hot plate is made of High strength refractory steel with hardness RC > 58 Dimension: 200 mm W x 300 mm L The hot plate is movable by the hot roller via friction Max. working temperature: 300°C Water chiller is required but not included if the working temperature is > 100°C Max. Rolling width on the plate: 150mm
Heating Temperature	Two digital temperature controllers for control hot roller and hot plate separately 200°C suggested, and 300°C maximum Max Heating Rate: 4°C/minute Temperature Control Accuracy: +/-3°C
Motor (Ar Gas Glove Box Compatible)	High torque 24VDC motor with reducing gear (1:75) Motor power: 40W Rolling speed adjustable: 5~45 r/min
Output Thickness	Depending on the electrode's material and thickness, typically: A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm Thickness uniformity: +/- 2 microns if coating electrode thickness +/- 5 micron and each rolling increased < 10 microns
Compliance	CE Certified NRTL or CSA certification is available upon request at extra cost
Warnings	Do not touch the surface of the rolling part of the machine when the rollers are heated up or running You may calibrate the temperature by TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy Multi-step thickness calendaring needed: While calendaring the sample sheet, make each calendaring decrement of 0.02mm compared with the sheet's original thickness