🚚 Free Worldwide Shipping on All Orders!Shop Now
8 Zones 1100C Max 4" OD Tube Furnace w/ Touch Screen Temperature Control Panel - OTF-1200X-VIII-100
HomeStore

8 Zones 1100C Max 4" OD Tube Furnace w/ Touch Screen Temperature Control Panel - OTF-1200X-VIII-100

8 Zones 1100C Max 4" OD Tube Furnace w/ Touch Screen Temperature Control Panel - OTF-1200X-VIII-100

OTF-1200X-VIII-80 is an Eight-zone 3" ID  split tube furnace with a separated touch screen temperature control unit and max working temperature of 1100oC. This eight-zone furnace can create a step thermal gradient or long constant temperature zone up to 60" within +/- 0.5ºC by adjusting the seven zone temperature. The furnace is installed with 100 OD x 92 ID x 2700 mm L ( mm) quartz tube and Ait-tight flange, and also can accept various processing tubes from 1" to 4".
SPECIFICATIONS:
 Furnace Structure
  • Double-layer steel case with air cooling to ensure furnace surface temperature < 60 °C
  • Energy-saving high purity fibrous alumina insulation.
  • Heating Element: high-quality Fe-Cr-Al Alloy doped by Mo
  • 86 " length x 5.5"dia heating chamber with 8 heating zone and 8 built-in thermal couples to accept processing tubes from 1" - 4" dia.x2700 mm length
  • The splittable cover is lifted and closed by a pair of heavy-duty compressed air springs to make tube replacement easy.
 
Power & Voltage
  • AC 208-240V Single Phase, 50/60 Hz 
  • 9 KW Max. (50A breaker required)
  • Powder cord is included without plug
  • Note: If use 208V, three-phase power panel, need min. 30A breaker
 Continuous Temperature
  •  1100 °C under flowing gas
  •  1000 °C under vacuum < 1 torr
  •  1000 °C under vacuum < 1 torr
 Max. Heating Rate
<= 10 °C /min
Quartz tube &
Thermal Block Placement
  • Quartz Tube: 100 OD x 92 ID x2700 L mm
  • Two fibrous alumina thermal blocks are included, which must be placed on two ends of the inside tube ( click pic below right )
   
Vacuum Flange 
  • One pair stainless steel vacuum flange is included with a quick assembling flange (an outside clamp for quick installation) without cooling.
  • Custom fitting is as request from customer ( 1/4NPT only , without valve )

Heating Zone
  • Eight independent heating zones:
    Left and right heating zone length: 200 mm each and the rest heating zone length 150 mm each
  • Total zone length: 60" ( 1500 mm ) ( Including spacers between heating zone)
  • Max. Constant temperature zone 60" ( 1500 mm ) if 8 zones heated at the same temperature ( within +/- 5°C)


Temperature Controllers
 
 
  • One touch screen digital temperature controller built-in a separated unit, which can control seven heating zones independently
  • Each channel is PID automatically controlled and saves 10 programs and each program has max. 30 segments
  • Built-in overheating & broken thermocouple protection.
  • +/- 1 ºC temperature accuracy.
  • Eight K-type thermocouples (one for each zone).
  • RS485 Communications Port built-in. and software included, 
  • The furnace may be operated by PC ( please order PC separately ).
  •      
Compliance
  • CE Certified
  • The furnace is ready to pass NRTLor CSA certification at extra cost.
  • The tube furnaces with quartz/mullite tubes are designed for use under vacuum and low pressure < 0.2 bar 
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • * Vacuum pressures may only be safely used up to 1000°C
  • The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube

 

$61,998.00
8 Zones 1100C Max 4" OD Tube Furnace w/ Touch Screen Temperature Control Panel - OTF-1200X-VIII-100—
$61,998.00

8 Zones 1100C Max 4" OD Tube Furnace w/ Touch Screen Temperature Control Panel - OTF-1200X-VIII-100

OTF-1200X-VIII-80 is an Eight-zone 3" ID  split tube furnace with a separated touch screen temperature control unit and max working temperature of 1100oC. This eight-zone furnace can create a step thermal gradient or long constant temperature zone up to 60" within +/- 0.5ºC by adjusting the seven zone temperature. The furnace is installed with 100 OD x 92 ID x 2700 mm L ( mm) quartz tube and Ait-tight flange, and also can accept various processing tubes from 1" to 4".
SPECIFICATIONS:
 Furnace Structure
  • Double-layer steel case with air cooling to ensure furnace surface temperature < 60 °C
  • Energy-saving high purity fibrous alumina insulation.
  • Heating Element: high-quality Fe-Cr-Al Alloy doped by Mo
  • 86 " length x 5.5"dia heating chamber with 8 heating zone and 8 built-in thermal couples to accept processing tubes from 1" - 4" dia.x2700 mm length
  • The splittable cover is lifted and closed by a pair of heavy-duty compressed air springs to make tube replacement easy.
 
Power & Voltage
  • AC 208-240V Single Phase, 50/60 Hz 
  • 9 KW Max. (50A breaker required)
  • Powder cord is included without plug
  • Note: If use 208V, three-phase power panel, need min. 30A breaker
 Continuous Temperature
  •  1100 °C under flowing gas
  •  1000 °C under vacuum < 1 torr
  •  1000 °C under vacuum < 1 torr
 Max. Heating Rate
<= 10 °C /min
Quartz tube &
Thermal Block Placement
  • Quartz Tube: 100 OD x 92 ID x2700 L mm
  • Two fibrous alumina thermal blocks are included, which must be placed on two ends of the inside tube ( click pic below right )
   
Vacuum Flange 
  • One pair stainless steel vacuum flange is included with a quick assembling flange (an outside clamp for quick installation) without cooling.
  • Custom fitting is as request from customer ( 1/4NPT only , without valve )

Heating Zone
  • Eight independent heating zones:
    Left and right heating zone length: 200 mm each and the rest heating zone length 150 mm each
  • Total zone length: 60" ( 1500 mm ) ( Including spacers between heating zone)
  • Max. Constant temperature zone 60" ( 1500 mm ) if 8 zones heated at the same temperature ( within +/- 5°C)


Temperature Controllers
 
 
  • One touch screen digital temperature controller built-in a separated unit, which can control seven heating zones independently
  • Each channel is PID automatically controlled and saves 10 programs and each program has max. 30 segments
  • Built-in overheating & broken thermocouple protection.
  • +/- 1 ºC temperature accuracy.
  • Eight K-type thermocouples (one for each zone).
  • RS485 Communications Port built-in. and software included, 
  • The furnace may be operated by PC ( please order PC separately ).
  •      
Compliance
  • CE Certified
  • The furnace is ready to pass NRTLor CSA certification at extra cost.
  • The tube furnaces with quartz/mullite tubes are designed for use under vacuum and low pressure < 0.2 bar 
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • * Vacuum pressures may only be safely used up to 1000°C
  • The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube

 

Product Information

Shipping & Returns

Description

OTF-1200X-VIII-80 is an Eight-zone 3" ID  split tube furnace with a separated touch screen temperature control unit and max working temperature of 1100oC. This eight-zone furnace can create a step thermal gradient or long constant temperature zone up to 60" within +/- 0.5ºC by adjusting the seven zone temperature. The furnace is installed with 100 OD x 92 ID x 2700 mm L ( mm) quartz tube and Ait-tight flange, and also can accept various processing tubes from 1" to 4".
SPECIFICATIONS:
 Furnace Structure
  • Double-layer steel case with air cooling to ensure furnace surface temperature < 60 °C
  • Energy-saving high purity fibrous alumina insulation.
  • Heating Element: high-quality Fe-Cr-Al Alloy doped by Mo
  • 86 " length x 5.5"dia heating chamber with 8 heating zone and 8 built-in thermal couples to accept processing tubes from 1" - 4" dia.x2700 mm length
  • The splittable cover is lifted and closed by a pair of heavy-duty compressed air springs to make tube replacement easy.
 
Power & Voltage
  • AC 208-240V Single Phase, 50/60 Hz 
  • 9 KW Max. (50A breaker required)
  • Powder cord is included without plug
  • Note: If use 208V, three-phase power panel, need min. 30A breaker
 Continuous Temperature
  •  1100 °C under flowing gas
  •  1000 °C under vacuum < 1 torr
  •  1000 °C under vacuum < 1 torr
 Max. Heating Rate
<= 10 °C /min
Quartz tube &
Thermal Block Placement
  • Quartz Tube: 100 OD x 92 ID x2700 L mm
  • Two fibrous alumina thermal blocks are included, which must be placed on two ends of the inside tube ( click pic below right )
   
Vacuum Flange 
  • One pair stainless steel vacuum flange is included with a quick assembling flange (an outside clamp for quick installation) without cooling.
  • Custom fitting is as request from customer ( 1/4NPT only , without valve )

Heating Zone
  • Eight independent heating zones:
    Left and right heating zone length: 200 mm each and the rest heating zone length 150 mm each
  • Total zone length: 60" ( 1500 mm ) ( Including spacers between heating zone)
  • Max. Constant temperature zone 60" ( 1500 mm ) if 8 zones heated at the same temperature ( within +/- 5°C)


Temperature Controllers
 
 
  • One touch screen digital temperature controller built-in a separated unit, which can control seven heating zones independently
  • Each channel is PID automatically controlled and saves 10 programs and each program has max. 30 segments
  • Built-in overheating & broken thermocouple protection.
  • +/- 1 ºC temperature accuracy.
  • Eight K-type thermocouples (one for each zone).
  • RS485 Communications Port built-in. and software included, 
  • The furnace may be operated by PC ( please order PC separately ).
  •      
Compliance
  • CE Certified
  • The furnace is ready to pass NRTLor CSA certification at extra cost.
  • The tube furnaces with quartz/mullite tubes are designed for use under vacuum and low pressure < 0.2 bar 
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
  • * Vacuum pressures may only be safely used up to 1000°C
  • The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube

 

You may also like

-70%
Thumbnail 1Thumbnail 2

5-Zone 1200C Tube Furnace w/ Touch Screen Controller and Optional Quartz Tube & Flanges (OD 80-130mm) - OTF-1200X-V-OD

$18,998.00

$5,699.40

-70%
Thumbnail 1Thumbnail 2

7 Zones 1200C Max. 5" Tube Furnace w/ Temperature Controller & Quick Flange - OTF-1200X-VII-5-UL

$42,985.00

$12,895.50

-70%
Thumbnail 1Thumbnail 2

Six-Zone Split Tube Furnace (Optional 2-4" Quartz Tube x 1.8 Meter L, 1200C Max.) - OTF1200XVI

$32,998.00

$9,899.40

-70%
Thumbnail 1

1500C 8-Zone Split Tube Furnace For Thermal Gradient Processing - OTF-1500X-8Z

$59,896.00

$17,968.80

-70%
Thumbnail 1Thumbnail 2

1500C Five Zone Split Tube Furnace with 84mm O.D Mullite Tube & Flanges - OTF-1500X-5Z

$29,998.00

$8,999.40

-70%
Thumbnail 1Thumbnail 2

1200°C, 10-zone Ø25-100 mm Tube Furnace w/ Horizontal & Vertical Positions - OTF-1200X-X-VT

$65,985.00

$19,795.50

-70%
Thumbnail 1

1100C 8-Zone High Pressure Super-Alloy Tube Furnace w/ Pressure Control System - OTF-1200X-VIII-80-GF

$140,000.00

$42,000.00

-70%
Thumbnail 1Thumbnail 2

1500C Six Zone Split Tube Furnace with Flange & Alumina Tube (60 O.D. x 1422 L,mm) - OTF-1500X-6Z

$49,998.00

$14,999.40

-70%
Thumbnail 1

12 Zone Ultra-Long Split Tube Furnace with 5" OD x 20’ ( 6 M) L Quartz Tube , 1100 ℃ Max.) - OTF-1200X-6M

$299,996.00

$89,998.80

-70%
Thumbnail 1Thumbnail 2

1200C 4-Zone Tube Furnace w/ Touch Screen Controller & Optional Quartz Tube & Flanges (OD 80 -130 mm) - OTF-1200X-IV

$19,998.00

$5,999.40

-70%
Thumbnail 1Thumbnail 2

Customized 1100oC 4 Zone Tube Furnace with 24" ( 600 mm) D°a Quartz tube and Flange - GSL-1100X-24-IV

$199,998.00

$59,999.40